ZENEC NAVICEIVER Z-E3215 anfang 2013 für BMW 3er e90/91/92

    Hey vassilist,


    no problem.


    At some facts the Zenec support doesn't know how the device works.
    Did you flashed Can and Main update together?
    Did you read the flashmanual?

    Well, I did it yesterday, but no luck, it didn't work.....
    What I did:
    - plugged off the negative pole of the battery for 30 minutes
    - reset, through the button the zenec device


    I had installed the latest firmware a few months before (main system and can interface), but I had not perform the battery disconnection step.


    I have no other problem with the zenec device but this. Don't know what else to do to fix it. Not that it is that bad, but it would be nice if it worked too.
    Thanks

    unlimited could you please post your system.ini file in order to compare yours and mine?


    Could it be that your file may have another one entry, that I don't have, controlling this feature.....

    Sorry, it's Setup.ini and it is located under C9SL_Config directory. Here is the content of mine:


    [Version]
    ADP=ADP 4 V0.109
    APP=APP_V 1.0.43_03P3_131026
    Data=5775
    Detail='01.39.10','Dec 06 2012','15:48:42',7165c1d5
    DeviceID=Z_E3215
    EBoot=EB2C9S10D_20121206
    Firmware=HW07-SW01.39.10
    Lib=5.6.2.9
    MCU=MCU_V 0.6.7_03P3_131025
    Manufacture=Parrot
    ModuleName=FC6000N
    NBoot=NB2CL000D_20100906
    OS=WOS_V 3.32.0_BMW3_121126
    RDSAFHandler=AF_HANDLER_V 2.8.6
    RDSBasebandDecoder=RDS_BASEBAND_DECODER_V 0.0.0
    RDSGroupDecoder=RDS_GROUP_DECODER_V 3.6.3
    RDSLibLink=LIBLINK_V 2.1.5
    UUID=1026501011300084
    [CarConfigInfo]
    ACInfo=1
    OBCInfo=1
    ParkRadar=4
    Suspresion=1
    TyrePressure=1
    [General]
    ACPopup=1
    ALLFUN=1
    ALTBtn=0
    AutoDimmer=0
    BrightnessSet=1
    KeyColor=4
    NaviDayNight=0
    NaviGuidState=0
    OPSBeep=1
    ParkAssist=2
    RadioField=2
    TFT=4
    UIControl=0
    [Volume]
    NaviVolume=1
    NavigationMix=1
    StartVolumeAdjust=5
    TAVolume=1
    VolumeStart=0
    [BassFreq]
    value=1
    [MiddleFreq]
    value=1
    [TrebleFreq]
    value=1
    [ASP]
    AuxinGain=6
    DVBTGain=6
    DVDGain=6
    HDGain=6
    SatGain=6
    TunerGain=8
    iPodGain=6
    [Misc]
    AntiSW=1
    ParkingOverride=0
    [Radio]
    GroupIndex=2
    [Video]
    Brightness=10
    [BassGain]
    value=9
    [user]
    bass=9
    treble=12
    [TrebleGain]
    value=12
    [Subwoofer]
    value=16

    Hi, hat von euch vl auch schon dieses problem gehabt, dass beim versuch ein update abzurufen der SD Cardreader mit der Navi Software vom PC nicht erkannt wird? Alle anderen SD Karten erkennt er. Naviextras Toolbox hab ich mir heruntergeladen. Bitte um Hilfe;-(


    Hab mir vorige Woche das Zenec 3215 gekauft und möchte das erste update machen!

    Erkennt der pc dein cardreader nicht oder navitool deine sd nicht?


    Macht schon einen Unterschied.